How to Remove Deodorant Stain and Scent

remove deodorant stain

It can be so embarrassing, especially at a business meeting or social event. When it does happen, you may wish you could crawl into a hole.

What are we talking about? When you raise your arm for something and show off an unsightly deodorant stain on your shirt. You know people notice because their eyes are drawn right to your armpit, and there’s never a hole close enough to crawl in to.

This type of stain builds up over time. When you perspire, some of the deodorant transfers to your clothing and each time you do the laundry, some of it sticks. However, to remove deodorant stain & odor can be accomplished with a few simple steps.

Plan ahead to remove deodorant stains

Before putting your clothes in the laundry basket, spray or rub areas of concern liberally with a product designed for treating laundry spots and stains. This way, your regular laundering will be much more effective.

Pre-treatments

Before laundering the offending garments, fill a sink, or if you have a lot of clothes, a bathtub with hot water and add a small scoop of laundry detergent. Mix it up until completely dissolved. Put the clothes in and let them soak for 30 minutes, and then launder them right away.

Color-safe bleaches

As you would do with pre-treating in a sink or tub, instead of using laundry detergent, add a scoop or two of a color-safe bleach, like OxyClean. Follow the directions on the package and allow plenty of dwell time for the oxidizing bleach to work.

Chlorine bleach

This is a last-resort attempt to remove a deodorant stain. Chlorine bleach, found under the name “Clorox” at your grocery store, is an oxidizer but very aggressive. Use with care. Follow directions on the bottle when you use this type of product either as a pre-treatment or in the washing machine.

And when you need something cleaned you can’t do yourself, such as your carpet, tile and grout, furniture or other surfaces, don’t forget to call Diablo Carpet Cleaning & Restoration. We know how to do it right!

Why Baking Soda is an Amazing Homemade Pet Stain Remover

cleaning carpets with baking soda, cleaning floors, carpet stains
Baking soda (not to be confused with baking powder) is sodium bicarbonate (NaHCO3). You can easily buy it in any grocery store.

This article is probably not the first time you’ve heard someone singing praises for baking soda. It’s not a miracle, in the strictest sense, but it sure can seem like it when used as a homemade pet stain remover.

This inexpensive white powder can help neutralize acidic substances, remove odors, and absorb wet messes. It’s not dangerous to your carpets or your pets when used on floors. It’s simultaneously more affordable and safer to use than many store-bought cleaners, yet highly effective.

Things Baking Soda Won’t Do:

  • deteriorate the color of your carpet
  • create moisture damage to your floors
  • cause any harm to your pets unless ingested in large amounts
  • cost you a lot of money

How to Use Baking Soda to Clean Up Urine

When you find a wet mess in your carpet, grab a box of baking soda and sprinkle it onto the wetness thickly. If your can, rake/spread the baking soda into the carpet fiber as opposed to saturating it. Allow the soda time to absorb moisture and wick the urine or moisture from the carpet fibers. There should be enough soda to absorb the mess fully. Do leave it until it’s dry. This may take 24 hours.

While the baking soda sits there, it’s both absorbing moisture and having a chemical reaction that uses its base Ph to neutralize the acidic urine. This is why the smell goes away. The acidic Ph of urine can also discolor or damage the color of your carpet or rug, but quick action with baking soda can prevent or minimize this affect.

Once the baking soda has dried, use a flat tool to scrape off the chunks of dried soda. This can be a spatula, putty knife/scraper, spoon, or similar item. Try to get all the large pieces off and leave only crumbly soda. Do not scrub or become overly aggressive with the tool.

The last step is vacuuming up the last bits of baking soda. If the baking soda is fully dry, this should work easily and look great. If you have a wet/dry shop vacuum, use this first. Then use a regular carpet vacuum with or without a beater bar.

If you find yourself with spots or marks on your carpeting that your homemade pet stain remover or other efforts don’t resolve, then give us a call. We’re always happy to serve as your full service carpet, rug, upholstery, tile and hardwood floor cleaner!

Tile and Grout Floor Care

Tile floors are everywhere, and where there’s tile, there’s also grout to separate it all, keeping everything nice and even, with straight lines.

But a straight line may not always be so… clean. Dirt and grime and other contaminants build up over time and make what was once a beautiful floor look downright ugly. The grout is especially susceptible to soiling and staining.

Just as you would clean any surface, tile and grout floors need special attention. If you keep them clean, following a maintenance schedule, you won’t have to deal with the tough issue of restorative cleaning.

Here are a few simple tips for you to follow in order to keep your tile and grout floors in tip-top shape.

Sweep it

The first step is keep the floor swept. Sweep it daily, which will remove dust and debris and other contaminants that can eventually cause tough-to-remove soiling.

Mop it

Tile floors are very easy to clean and maintain. Use a clean mop and an approved detergent to clean the floor. Some prefer the newer flat floor cleaners. Doesn’t matter the tool, it is how you use it and the products you choose.

Some recommend the use of chlorine bleach, which acts as a disinfectant. The challenge here is remaining residues can create issues, such as being tracked off onto carpet, causing color loss. Be careful with the use of any type of bleach.

Grout issues

The toughest part of a tile and grout floor cleaning job is… the grout. It’s porous, even if sealed, and becomes an eyesore quickly. Purchase a heavy-duty grout cleaner and follow the directions. You will most likely be on your hands and knees, and it takes time to do this right. Apply the product to the grout, allow some reasonable contact time, and scrub – scrub – scrub! Repeat as necessary. Work carefully until the grout looks great again.

When everything is cleaned up, be sure to rinse with a neutral detergent, or just water, and let air dry and inspect. You will find areas need more attention. When you do… get back to work!

Tile and grout cleaning is no easy task, especially when it becomes really soiled. When you find yourself up against an impossible task, do the smart thing. Call your professional cleaning company. After all, it pays to call a pro!

Who Spilled the Grape Juice?